Showing posts with label table. Show all posts
Showing posts with label table. Show all posts

Tuesday, March 14, 2017

Dyed Vintage Doily Table Runner



On a recent trip to my visit my folks, my mom pulled out a big bag of doilies. They were yellowed and all had coffee or tea stains, but the loving hands of my grandmothers had made most of them, so my mom couldn't throw them out. She asked if I would like to try to repurpose them. 

You bet I would! I have seen some beautiful repurposed doily creations by crafters and decorators around the blogosphere: added to clothing, pillows, and pieced into table runners. 


Here in the greater Seattle area where I live, we have had one of the rainiest winters on record. I saw an article yesterday that said Seattle has had 3 sunny days since the start of October. THREE. So I shouldn't be surprised that I have been aching to brighten up my house with all the spring colors I can get my hands on. I have even considered painting my dining table white.  

So, naturally, I decided to make a bright, spring table runner with the doilies. I will walk you through the steps of how you can make one for yourself, and give ideas of where to purchase what you need--even the doilies if you don't have heirlooms from your grandmothers. 

YOU WILL NEED: 

Doilies





Dyes/Dye Kits

These kits are so nice because they come with squirt bottles and gloves. I actually used some of these neon colors on my project, I just didn't leave them to "process" for as long as suggested so the colors would be more pastel.
Find this and other kits here.

Large trays/cookie sheets

Protective Gloves

Squirt bottles/ Mixing bottles


STEP 1
Mix your dyes in squirt bottles according to package directions. If some of your doilies are made of synthetic fibers, add a little vinegar to your dye for color sustainability. 

Lay out your doilies on trays. Large ones can be folded in half to fit.  I recommend taking everything outside. It was raining throughout this project, but I didn't let it stop me!

STEP 2


One color at a time, slowly squirt the dye on layers of the doily designs. This part was super exciting for me. I loved how the color contrasts really made the beautiful designs of my grandmothers' handiwork come to life!
Don't worry about the colors bleeding into each other. That should happen. It will soften up the look of the final product. 

STEP 3
Gently squeeze out excess dye from each doily and place them in individual baggies.  Let them sit for 4-8 hours (depending on how bold you want your colors). 

STEP 4
This was an exciting load of laundry to remove from the dryer!

Remove the doilies from the bags straight into your washing machine. Wash with a little detergent and cold water on a gentle cycle. I threw a couple of old towels in with mine as "padding" for the roughness of the machine's agitator.  Tumble dry on low.  Remove and iron. I used spray starch to stiffen mine up a bit. 

STEP 5

Lay out your doilies and decide how you want to arrange them for your table runner. I ended up not using 2 of mine. They may become pillows in the future. 

Pin and Sew
If you look closely, you can see my straight pins holding together the pieces. 

Use a ziz-zag stitch in coordinating thread to sew the pieces together. It will be virtually invisible in the finished product.  I ironed it one more time after sewing. 



My little dining room feels much more ready for Spring! I smile every time I look in at the happy color and think of my sweet grandmothers and the time they spent making beauty for their homes. I am so grateful these special pieces of art were preserved.


Friday, September 19, 2014

Fall Table Runner


I tend to lean on the side of contemporary--rather than country--in most of my decor, except when I am decorating for fall. Then, I pull out the burlap, the wood, the leaves, and the twine.  I love the cool air and earthy smells of fall. I LOVE the warm colors. And I LOVE this table runner.

It is fun and easy (though not quick--I'm not gonna lie).  I had it in my mind as a concept, so I wasn't entirely sure how it would work. It will be considerably faster for someone following my tutorial, than it was for me figuring it out as I went!

This is a highly customize-able craft. Once you see how it is done, you can create your own design and make it fit your aesthetic desires. 

You will need:

  • 1 plain burlap table runner. I made mine by hemming the sides of a strip of burlap to fit my table. 
  • 1/4 -1/2 yard of burlap in 2-3 complimentary tones (one can match runner)
  • Tacky Glue
  • Jute Twine
  • 1/2-1 yard Heat-n-Bond iron-on adhesive or similar product



I stuck with earthen tones for my burlap. I tried Elmer's Glue-All also, but I don't recommend it. It was too runny for the purpose. Tacky Glue is just that--tacky. 

This worked well enough, but I wouldn't hesitate to by the not "lite" version since this is burlap. Any bonding that was less-than-secure after ironing this on was taken care of by the gluing step. 

1. Find or create some pumpkin and leaf stencils/patterns out of paper. I traced some leaf decorations I already had and free-handed the pumpkins. Many templates are available online. 

2. Pin your leaf and pumpkin patterns to some of the coordinating burlap and cut them out. I didn't end up liking the way the maple leaf design looked on my runner, but I plan to use it on a pillow!


3. To make the coordinating parts on the pumpkin: Cut a pumpkin shape out of two different colors of burlap. Here the white burlap is on the bottom, the brown on top. Trace lines as shown to divide the pumpkin into 7 curved strips. Cut the strips out. Repeat this for each pumpkin you are making.

4. Lay out your design. I played around with mine a lot. I originally planned to do this "applique" over the entire runner, but because I have a fairly large center piece I use in the fall, I decided to just put it on each end. 


5. Read the directions on the Heat-n-Bond. I will walk you through it as well, but reading it will help. Beginning with the top layer of the applique (here, the pumpkin strips) bond the Heat-n-Bond to the back (paper will still be attached). 
**Place a piece of disposable fabric or paper over your ironing board when you are working with the iron-on adhesive. The glue will get on everything below when you turn it over to iron. (I should have shown this so you weren't looking at my old, stained ironing board cover!) 

6. Cut out the pieces with the paper backing still on. 

7. Remove the paper, leaving the clear bonded film on each piece. 
8. Attach the pieces to the pumpkins by ironing in place per the Heat-n-Bond directions. 
9.  Repeat the process for the leaves and the pumpkins--so each piece is cut out with the film exposed. 10. Place each piece where you want it on the table runner and iron in place. 

11. Using the Tacky Glue, attach the jute twine along all the seams of the applique. I added a line of twine up the middle of the leaves to add some dimension.I also made a few curly-cue vines with the twine at the top of the pumpkins. 
This glue will take about 6-8 hours to dry clear. I pressed down the twine and re-positioned it a few times as it was drying. 

And you are done! Isn't it fun?!


Smart Party Planning


Partying at: